Part # 1965-20

For use in steel construction. Can be welded to steel beams in fabrication shop or in the field. Allows for easy removal and re-use of posts. 

Part # 1965-55

Can be attached using fasteners

to secure it to:
1) Wood blocking at roof level
2) Existing Concrete Structures
3) Concrete Framing for embedment in concrete when the pour will be 5" or less

Part # 1965-45

For use in pour-in-place concrete construction. Adjustable to accommodate concrete thickness from 5" to 12". Can be secured with rebar and/or by screws to framing prior to pouring concrete.

Part # 1965-150

Slides into pre-cast hollow core planks. Indicate thickness of web when ordering.

Part # 1965-140

Can be welded or attached to an existing wall using fasteners.

Part # 1965-130

Designed for use on bridge structures. Allows attachment to steel I-beam without welding or drilling. Accommodates I-beams from 8” to 12” wide and up to 1” thick.

Part # 1965-110

Can be attached to parapet walls or rotated 90 degrees and attached to the edge of concrete floors. Accommodates walls and floors from 6" to 14" thick.

Part # 1965-120

Designed for the NJ Meadowlands stadium and the Prudential Center. Can be used during the construction of stadium seating. Clamps to concrete stairs with thicknesses from 15” to 25”.

Part # 1965-155

Designed to be embedded into panel during ground fabrication. Can be used as a tie-off point or post application.

(ships unpainted)

Part 1965-175

Designed to be embedded in poured concrete floors and columns 6" to 12".  (ships unpainted)

Part #1925-210

Provides an attachment point at the bar joist for a tie-off point anchor. (ships unpainted)

Part #1965-225

Designed for steep sloped roofs and attaches with 3 3/4" fasteners into the rafters.

Part# 1965-185

Fits over steel deck and attaches with Tek #5 screws.